TM 9-2320-272-24-1
3-109. FUEL SELECTOR VALVE SWITCH REPLACEMENT
THIS TASK COVERS:
a. Removal
b. Installation
INITIAL SETUP:
APPLICABLE MODELS
REFERENCES (TM)
All
TM 9-2320-272-10
TM 9-2320-272-24P
TOOLS
General mechanic's tool kit (Appendix E, Item 1)
EQUIPMENT CONDITION
l Parking brake set (TM 9-2320-272-10).
MATERIALS/PARTS
Two locknuts (Appendix D. Item 283)
NOTE
Tag wires for installation.
1.
Disconnect two wires (2) and wire (14) from fuel selector valve switch (3).
2.
Remove screw (9), washer (10), lever (8), felt washer (11), and washer (7) from fuel selector valve
switch (3).
3.
Remove nut (12), washer (6), and plate (5) from fuel selector valve switch (3).
4.
Remove fuel selector valve switch (3) from bracket (4).
6.
Remove two locknuts (1), screws (13), and bracket (4) from instrument panel (15). Discard locknuts (1).
1.
Install bracket (4) on instrument panel (15) with two screws (13) and new locknuts (1).
2.
Position fuel selector valve switch (3) on bracket (4) and install plate (5), washer (6), and nut (12).
3.
Install lever (8) on fuel selector valve switch (3) with washer (7), felt washer (11), washer (10), and
screw (9).
4.
Connect two wires (2) and wire (14) to fuel selector valve switch (3).
3-296