TM
9-2320-272-24-1
THIS TASK COVERS:
a. Removal
c. Assembly
b. Disassembly
d. Installation
APPLICABLE MODELS
EQUIPMENT CONDITION
All
Parking brake set (TM 9-2320-272-10).
Air reservoirs drained (TM 9-2320-272-10).
TOOLS
Hood raised and secured (TM 9-2320-272-10).
General mechanic's tool kit (Appendix E, Item 1) Battery ground cables disconnected (para. 3-126).
Disconnect CTIS electrical components (M939A2)
MATERIALS/PARTS
(para. 3-470).
Three spring nuts (Appendix D, Item 673)
GENERAL SAFETY INSTRUCTIONS
Three cotter pins (Appendix D, Item 53)
Do not disconnect air lines before draining air
REFERENCES (TM)
reservoirs. Small parts under pressure may shoot
TM 9-2320-272-10
out with high velocity, causing injury to personnel.
TM 9-2320-272-20P
Remove screw (15), clamp (3), cable (1), and retaining clip (4) from diverter bracket (6).
1.
Remove cotter pin (16) from control rod (5). Discard cotter pin (16).
2.
Tag cables for installation.
3.
Remove
cable (1) and spring nut (2) from control rod (5). Discard spring nut (2).
4.
Remove
screw (14), clamp (10), cable (13), and retaining clip (8) from diverter bracket (7).
5.
Remove
cotter pin (12) from control rod (9). Discard cotter pin (12).
Remove
heat control cable (13) and spring nut (11) from control rod (9). Discard spring nut (11).
6.
Remove
screw (20), retaining nut (22), and clamp (21) from heater assembly (17).
7.
Remove
cotter pin (23) from heater assembly (17). Discard cotter pin (23).
8.
Remove
fresh air control cable (19) and spring nut (18) from heater assembly (17). Discard spring
9.
Remove eight screws (26) from instrument cluster (25).
10.
11.
Separate instrument cluster (25) from instrument panel (24).
3-238
