TM 9-2320-260-34-2
16-9. REAR WINCH LEVEL WIND MAINTENANCE (Contd)
6. Remove grease fitting (15) and locknut (14) from pivot shaft (2). Discard locknut (14).
7. Remove pivot frame (1) and pivot shaft (2) from trolley frame (16).
8. Remove upper race (3), forty-five ball bearings (18), and lower race (4) from trolley frame (16).
NOTE
Wheel sets of both axles are disassembled the same. Left axle
wheel set is shown.
9. Remove two grease fittings (8) from ends of axle (17).
10. Remove two
snaprings (7), washers (6), outer felt washers (5), wheels (9), inner felt washers (11),
washers (12) from axle (17). Discard felt washers (5) and (11).
and thrust
11. Using arbor
press, remove two bearings (10) from wheels (9).
12. Remove two
grease fittings (13) from trolley frame (16).
16-60
