TM 9-2320-260-34-2
16-9. REAR WINCH LEVEL WIND MAINTENANCE (Contd)
Table 16-9. Rear Winch Level Wind Wear Limits.
WEAR LIMITS/TOLERANCES
ITEM
lTEM/POINT OF MEASUREMENT
NO.
INCHES
MILLIMETERS
Thrust washers - thickness - minimum
1.562
1
0.0615
2
Axles (4 places) minimum
1.9995
50.787
4
Pivot shaft bearing surface outer diameter -
22.212
minimum
0.8745
Trolley frame shaft bore inner diameter
5
19.05
maximum
0.750
Ball bearings minimum
14.275
0.5620
8
12
Races
10
10.26
Grooves - thickness minimum
0.404
11
2.811
71.40
Race - inner diameter - maximum
13
Trolley wheel
95.12
3.745
Outer diameter minimum
Inner diameter maximum
2.5622
65.08
16-65
