TM 9-2320-260-34-2
16-8. REAR WINCH REPAIR (Contd)
Install bracket (29) on end frame (9) with four washers (34), screws (33), new lockwashers (26),
33.
and nuts (25).
Aline frame bar (35) with hole in bracket (29) and position tensioner (36) end plate against
34.
bracket (29). Install tensioner (36) on bracket (29) with two screws (27), new lockwashers (24),
and nuts (23).
Install bracket (37) on gearcase (1) and tensioner (36) with four new lockwashers (19), screws (18),
35.
two screws (20), new lockwashers (21), and nuts (22).
Install lever (28) on bracket (29) with pin (30) and two new cotter Pins (31).
36.
Aline hole in lever (28) with hole in slot on frame bar (35) and install pin (32) in frame bar (35)
37.
and lever (28) with two new cotter pins (31).
Install rear winch level wind (para. 16-9)
FOLLOW-ON TASKS:
q
Z Install rear winch (TM 9-2320-260-20).
q Lubricate winch (LO 9-2320-260-12).
16-57
