T M 9-2320-260-34-2
16-5. FRONT WINCH ROLLER MAINTENANCE (Contd)
NOTE
Assistant will help with step 1.
Do not tighten screws on front winch model 7411122. Proceed
to step 2.
1.
Install winch roller (5) on front winch (1) with eight new lockwashers (7), screws (6), four new lock-
washers (3), and screws (4).
NOTE
Perform step 2 for front winch model 7411122.
2.
Measure distance between machined pads (8). Distance must be 15.50 0.06 in. (39.370 0.152 cm).
Move brackets (2) and (9) using slack at screw holes to set correct distance.
Tighten eight screws (6) and four screws (4).
3.
Lubricate roller (LO 9-2320-260-12).
FOLLOW-ON TASKS:
q
q Install cable tensioner (if removed) (para 16-4).
q Install winch cable (TM 9-2320-260-20).
16-40
