TM 9-2320-260-34-2
15-55. LIFTGATE CONTROL LINKAGE MAINTENANCE (M820A2)
THIS TASK COVERS:
d. Assembly
a. Removal
e. Installation
b. Disassembly
c. Cleaning and Inspection
INITIAL SETUP
REFERENCES (TM)
APPLICABLE MODELS
M820A2
LO 9-2320-260-12
TM 9-2320-260-10
TOOLS
TM 9-2320-260-34P-2
General mechanic's tool kit
EQUIPMENT CONDITION
(Appendix B, Item 1)
Parking brake set (TM 9-2320-260-10).
MATERIALS/PARTS
Liftgate lowered to ground level
Seven cotter pins (Appendix D, Item 35)
(TM 9-2320-260-10).
Lubricating oil (Appendix C, Item 21)
a. Removal
Remove both connector rods from levers and latch hooks.
1. Remove two nuts (9), washer (7), cotter pin (3) and connector rod (6) from lever (8) and latch
hook (1). Discard cotter pin (3).
NOTE
Remove both latch hooks from main frame.
2. Remove two snaprings (4), shaft (10), latch hook (1), and two collars (2) from main frame (5).
3. Remove cotter pin (29), pin (16), nut (28), and connector link (15) from control valve (18) and
lever (27). Discard cotter pin (29).
4. Remove cotter pin (20), washer (19), cotter pin (17), and connector link (23) from connector rod (12)
and Iever (26). Discard cotter pins (20) and (17).
5. Remove cotter pin (21), pin (22); and connector rod (12) from control valve (18). Discard cotter
pin (21).
6. Remove two cotter pins (11), pin (14), and connector rod (12) from bracket (13). Discard cotter
pins (11).
NOTE
Remove both handle grips from levers.
7. Remove handle grip (24) from lever (25).
15-210
