TM 9-2320-260-34-2
15-56.
4. Install three wires (18) on terminal studs (4) with washers (22), and nuts (23).
5. Clean gasket (3) remains from sealing surfaces of terminal cover (2) and auxiliary pump (5). Apply
gasket sealant (3) to terminal cover (2) and install gasket (3) and terminal cover (2) on auxiliary
pump (5) with four screws (1).
6. Wrap male threads on elbows (9) and (7) with antiseize tape.
7. Install elbows (9) and (7) on auxiliary pump (5).
8. Connect hydraulic hoses (10) and (8) on elbows (9) and (7).
FOLLOW-ON TASKS:
Connect battery ground cable (TM 9-2320-260-20).
Fill hydraulic system (LO 9-2320-260-12).
Start engine and check operation (TM 9-2320-260-10).
15-215
