TM 9-2320-260-34-2
15-54. LIFTGATE CLUTCHES REPLACEMENT (M820A2)
THIS TASK COVERS:
b. Installation
a. Removal
INITIAL SETUP
REFERENCES (TM)
APPLICABLE MODELS
TM 9-2320-260-10
M820A2
TM 9-2320-260-34P-2
TOOLS
EQUIPMENT CONDITION
General mechanic's tool kit
q Parking brake set (TM 9-2320-260-10).
(Appendix B, Item 1)
q Liftgate platform and hinge removed
MATERIALS/PARTS
Two Iockwashers (Appendix D, Item 230)
Four pins (Appendix D, Item 318)
1.
Remove four pins (1) and two pivots (2) from left hand clutch (13), right hand clutch (7), and two
closing cylinder rods (9) and (14). Discard pins (1).
2. Remove screw (11), lockwasher (12), and left hand clutch (13) from closing cylinder rod (14) and lift
frame shaft (10). Discard lockwasher (12).
3. Remove screw (6), lockwasher (5), two screws (4), nuts (3), and right hand clutch (7) from closing
cylinder rod (9) and lift frame shaft (8). Discard lockwasher (5).
b. Installation
Install right hand clutch (7) on lift frame shaft (8) with two screws (4), nuts (3), new lock-
1.
washer (5), and screw (6).
Install left hand clutch (13) on lift frame shaft (10) with new lockwasher (12) and screw (11).
2.
3. Connect left hand clutch (13) and right hand clutch (7) to two closing cylinder rods (14) and (9)
with two pivots (2) and four new pins (1).
15-208
