TM 9-2320-260-34-1
9-4. TRANSFER REPAIR (Contd)
Aline teeth of sprag races (2) with teeth of shift gear (8) and install shift gear (8) over sprag races (2)
33.
and mating teeth of driven gear (1). Ensure groove of shift gear (8) is toward threaded end of front
output shaft (3).
Place collar (7) over threaded end of front output shaft (3).
34.
NOTE
Assistant will help with steps 35 through 37.
Position front output shaft cover (6) on arbor press with open end up.
35.
Place clutch fork (4) in groove in shift gear (8) and place front output shaft (3) and sprag shifter
36.
shaft (5) in front of output shaft cover (6) alining front output shaft (3) in bearing (10) and sprag
shifter shaft (5) with seal in bore (9).
Holding collar (7) in place on front output shaft (3), press front output shaft (3) through bearing (10).
37.
Ensure collar (7) passes over inner snapring retaining bearing (10).
9-40