TM 9-2320-260-34-1
9-4. TRANSFER REPAIR (Contd)
47.
Position washer (3) over input shaft (1) and seat against bearing in gear (2).
48.
pressing on inner race of bearing (4), press bearing (4) on input shaft (1) until bearing (4) clears
groove on input shaft (1).
Install retaining ring (5) in groove of input shaft (1). Ensure retaining ring (5) fully seats in groove.
49.
Press bearings (10) and (6) and spacer (7) into LO-speed gear (8). Seals of bearings (10) and (6) face
50.
out horn gear (8).
Slide synchronizer (11) over input shaft (1) and on splines (12).
51.
Place input shaft (1) and synchronizer (11) on arbor press and press LO-speed gear (8) onto
52.
input shaft (1), with LO-speed gear extension (9) toward synchronizer (10 Seat bearing (10 to
shoulder (13) on input shaft(1) by splines (12).
9-42
