TM 9-2320-260-34-1
9-4. TRANSFER REPAIR (Contd)
Install new woodruff keys (15) and (17) in intermediate shaft (16). Ensure there are no burrs on
53.
woodruff keys (15) and (17) after installation.
Position HI-speed intermediate gear (18) on arbor press with flat side up.
54.
Position intermediate shaft (16) with splined end up over HI-speed intermediate gear (18), aline
55.
woodruff key (17) with keyway, and press intermediate shaft (16) into HI-speed intermediate
gear (18) to shoulder on intermediate shaft (16).
Position LO-speed intermediate gear (14) in arbor press with flat side up.
56.
Position intermediate shaft (16) with splined end down over LO-speed intermediate gear (14),
57.
aline woodruff key (15) with keyway, and press intermediate shaft (16) into LO-speed gear (14) to
shoulder on intermediate shaft ( 16).
Press two tmered roller bearings (19) on intermediate shaft (16), seating inner race of bearings (19)
58.
against gears (14) and (18).
9-43
