TM 9-2320-260-34-1
9-4. TRANSFER REPAIR (Contd)
13.
Remove cotter pin (32), nut (33), and washer (34) from brakedrum (35) and rear output shaft (41).
Discard cotter pin (32).
14.
Using puller, remove brakedrum (35) from rear output shaft (41).
15.
Remove six locknuts (45), flange (44), and shield (43) from brakedrum (35). Discard locknuts (45).
NOTE
Record thickness of shims for installation.
16.
Remove six screws (36), lockwashers (37), cap (38), and shim(s) (39) from rear output shaft (41)
and transfer (1). Discard lockwashers (37) and shim(s) (39).
17.
Remove two screws (28), lockwashers (27), and bracket (31) from cover (25). Discard lock-
washers (27).
18.
Remove two screws (23), lockwashers (26), bracket (22), cover (25), and shim(s) (24) from
transfer (1). Discard lockwashers (26) and shim(s) (24).
19.
Remove six screws (21), lockwashers (20), cover ( 19), and gasket (18) from transfer (1). Discard
gasket (18) and lockwashers (20).
20.
Bend tabs of locktab washer (29) away from screws (30).
21.
Remove two screws (30), locktab washer (29), and plate (40) from intermediate shaft (42). Discard
locktab washer (29).
9-15