TM 9-2320-260-34-1
9-4. TRANSFER REPAIR (Contd)
NOTE
Assistant will help with steps 56 through 63.
Position input shaft (1) on arbor press with LO-speed gear (2) facing upward.
56.
Press input shaft (1) out of spacer ring (3) and LO-speed gear (2).
57.
58.
Press two bearings (4) and spacer (5) out of LO-speed gear (2).
59.
Remove synchronizer (6) from input shaft (1).
60.
Remove retaining ring (9) from input shaft (1).
Position input shaft (1) on arbor press with HI-speed gear (12) facing upward.
61.
Press input shaft (1) out of rear bearing (10), washer (11), and HI-speed gear (12).
62.
Press two bearings (8) and spacer (7) out of HI-speed gear (12).
63.
9-20