TM 9-2320-260-34-1
9-4. TRANSFER REPAIR (Contd)
WARNING
All personnel must stand clear during lifting operations. A swing-
ing or shifting load may cause injury to personnel.
NOTE
Assistant will help with step 4.
4. Raise transfer (1) and install on repair stand with seven washers (9) and screws (8) through two
repair stand brackets. Tighten screws (8) 80-100 lb-ft (109-136 Nm).
5. Remove lifting device from transfer (1) by unhooking from lifting bracket (2) or removing two
nuts (3), screws (6), four washers (7), and chain. Install screws (5), lockwashers (4), and nuts (3)
on transfer (1).
6. Record evidence of oil leaks and then clean exterior of transfer (1) (para. 2-8).
9-13
