TM 9-2320-260-34-1
9-4. TRANSFER REPAIR (Contd)
41.
Install chain at three points of front cover (4) with screws (2), washers (3), and nuts (5). Hold
nuts (5) between flanges of front cover (4) and housing (6) while threading in screws (2).
NOTE
Assistant will help with step 42.
42.
Maintain tension on chain with lifting device and continue evenly turning screws (1).
43.
Remove front cover (4) from housing (6) and remove three screws (1).
44.
Remove three screws (2), washers (3), nuts (5), and chain from front cover (4).
45.
Remove gasket (7) from housing (6) and front cover (4). Discard gasket (7).
Lift rear output shaft (13) and intermediate shaft (12) from housing (6).
46.
47.
Remove four screws (8), lockwashers (9), cover (10), and gasket (11) from housing (6). Discard
48.
Remove shifter shaft detent screw (19), lockwasher (18), spring (17), plunger (16), and ball (15) from
hole (14). Use small magnet as necessary. Discard lockwasher (18).
9-18