TM 9-2320-260-34-1
9-4. TRANSFER REPAIR (Contd)
49.
Remove setscrew (26) from hole (25).
Turn slotted end of screw (24) counterclockwise until it stops.
50.
51.
Remove safety wire (21) from setscrew (20). Discard safety wire (21).
52.
Remove setscrew (20) from shift fork (22) and range shifter shaft (23).
53.
Working from front of housing (6), use two prybars and protective blocking to lift input shaft (27)
and rear bearing (28) free of housing (6). Range shifter shaft (23) and shift fork (22) will come free
when input shaft (27) is free of housing (6).
NOTE
Seps 54 and 55 are an alternate method to remove input shaft.
Assistant will help with steps 54 and 55.
Place housing (6) and input shaft (27) on arbor press with rear of housing (6) facing upward.
54.
55.
Press rear bearing (28), input shaft (27), shift fork (22), and range shifter shaft (23) out of
housing (6).
9-19