TM 9-2320-260-34-1
3-19. CAM FOLLOWER HOUSING MAINTENANCE (Contd)
b. Disassembly
1. Remove two setscrews (8) from cam follower housing (3).
NOTE
Mark location of each cam follower lever for installation.
2.
Using hammer and punch, remove plug (9) from end of cam follower housing (3). Discard plug (9).
3.
Using arbor press, remove two follower shafts (10) and plug (11) from opposite end of cam follower
housing (3). Discard plug (11).
4.
Remove six cam follower levers (7) from cam follower housing (3).
5.
Remove retaining pin (12) from cam follower levers (7) and roller pins (13).
6.
Using arbor press, remove roller pins (13) and rollers (14) from cam follower levers (7).
3-53
