TM 9-2320-260-20
THIS TASK COVERS:
a. Removal
b. Installation
INITIAL SETUP
APPLICABLE MODELS
EQUIPMENT CONDITION
All
Parking brake set (TM 9-2320-260-10).
Hood raised and secured (TM 9-2320-260-10).
MATERIALS/PARTS
Battery ground cable disconnected (para. 4-48).
Eight lockwashers
Glove compartment removed (para. 11-33).
Four locknuts
REFERENCES (TM)
TM 9-2320-260-10
TM 9-2320-260-20P
1. Disconnect cable (8) and harness (7) from regulator (9).
NOTE
Assistant will help with step 2.
2. Remove four locknuts (4), screws (6), lockwashers (5), and regulator (9) from mounting plate (1)
and firewall (3). Discard locknuts (4) and lockwashers (5).
3. Remove four screws (11), lockwashers (10), and two brackets (2) from regulator (9). Discard
lockwashers (10).
b. Installation
1. Install two brackets (2) on regulator (9) with four new lockwashers (10) and screws (11).
NOTE
Assistant will help with step 2.
2. Install regulator (9) on mounting plate (1) and firewall (3) with four new lockwashers (5), screws (6),
and new locknuts (4).
3. Connect cable (8) and harness (7) to regulator (9).
14-82
