TM 9-2320-260-20
I
I
11-33. GLOVE COMPARTMENT REPLACEMENT
THIS TASK COVERS:
b. Installation
a. Removal
INITIAL SETUP
REFERENCES (TM)
APPLICABLE MODELS
TM 9-2320-260-10
All
TM 9-2320-260-20P
MATERIALS/PARTS
EQUIPMENT CONDITION
Seal
Parking brake set (TM 9-2320-260-10).
1.
Remove two screws (2) and bracket (3) from instrument panel (4).
2.
Remove ten screws (9) and glove compartment (1) horn instrument panel (4).
3.
Remove four nuts (6), screws (7), and glove compartment door (6) from instrument panel (4).
4.
Inspect glove compartment door seal (8). If d-aged, remove seal (8) and clean debris from
mounting surface of seal (8).
NOTE
Perform steps 1 and 2 only if seal was removed.
1.
Apply adhesive to mounting surfaces of glove compartment door (6) and seal (8).
2.
Install seal (8) on glove compartment door (6).
3.
Install bracket (3) on instrument panel (4) with two screws (2).
4.
Install glove compartment dwr (6) on instrument panel (4) with four screws (7) and nuts (5).
5.
Install glove compartment (1) on instrument panel (4) with ten screws (9).
11-63