TM 9-2320-260-20
14-46. FLOATING SEATBELT KIT REPLACEMENT (Contd)
4. Remove locknut
(35), screw (38), two washers (36), and bracket (37) from cab channel member (1).
Discard locknut (35).
d. Companion Seatbelt Installation
1. Install bracket (37) on cab channel member (1) with two washers (36), screw (38), and new
locknut (35). Tighten locknut (35) 20-25 lb-ft (27-34 N.m).
2. Install retractor (33) on bracket (37) with three washers (32), screw (34), and new locknut (31).
Tighten locknut (31) 20-25 lb-ft (27-34 N.m).
3. Install spacer (29) in cab channel member (2).
4. Install bracket (26) on cab channel member (2) with two washers (5), screw (6), and new
locknut (30). Tighten locknut (30) 20-25 lb-ft (27-34 N.m).
5. Install anchor (27) on bracket (26) with three washers (3), screw (28), and new locknut (4). Tighten
locknut (4) 20-25 lb-ft (27-34 N.m).
14-87
