TM 9-2320-260-20
I
THIS TASK COVERS:
a. Removal
b. Installation
INITIAL SETUP
APPLICABLE MODELS
EQUIPMENT CONDITION
All
Parking brake set (TM 9-2320-260-10).
Air cleaner removed (para. 3-15).
REFERENCES (TM)
TM 9-2320-260-10
TM 9-2320-260-20P
a. Removal
1. Remove three retaining springs (7) from front fender (12) and side panel loops (11). Repeat for
opposite side.
2. Unfasten buckles (3) and pull straps (1) through loops (2).
3. Unfasten buckle (6) and pull strap (4) through loops (5). Repeat for opposite side.
4. Remove radiator cover (8) from brushguard (9).
5. Unfasten buckles (15) and pull straps (14) through loops (13). Repeat for opposite side.
6. Remove hood cover (16) from hood (10).
7. Unfasten buckles (20) and pull straps (19) through loops (18).
8. Remove side panel cover (17) from side panel (21). Repeat for opposite side.
b. Installation
1.
Install side panel cover (17) on side panel (21) and insert loops (18) through cover (17).
2.
Thread straps (19) through loops (18) and fasten buckles (20). Repeat for opposite side.
3.
Install hood cover (16) on hood (10) and insert loops (13) through cover (16).
4.
Thread straps (14) through loops (13) and fasten buckles (15). Repeat for opposite side.
5.
Install radiator cover (8) on brush guard (9) and insert loops (2) and (5) through cover (8).
6.
Thread straps (1) through loops (2) and fasten buckles (3).
Thread strap (4) through loops (5) and fasten buckle (6). Repeat for opposite side.
7.
8.
Install three retaining springs (7) on front fender (12) and side panel loops (11). Repeat for
opposite side.
14-42
