TM 9-2320-260-20
14-22. HARDTOP KIT MAINTENANCE (Contd)
NOTE
Do not tighten screws or nuts until kit is fully installed.
Position new seal (3), two retainers (4), and back panel (2) on cab (6), aline holes, and install with
1.
two retainers (4), screws (5), fourteen screws (1), washers (8), and new locknuts (7).
NOTE
Assistant will help with step 2.
Position new seal (15) and roof (11) on back panel (2), aline holes, and install with twenty-eight
2.
washers (14), fourteen screws (16), and new locknuts (13).
Install two washers (18), screw (17), and new locknuts (12) on roof (11) and windshield
3.
frame (19).
4.
Close cab doors and inspect all panels for proper alinement and seating. Adjust as required.
5.
Tighten all screws and nuts.
6.
Install two new lockwashers (10) and screw (9) on roof (11) and windshield frame (19).
14-46
