TM 9-2320-260-20
14-20. THERMAL BARRIER INSULATION REPLACEMENT
THIS TASK COVERS:
a. Removal
b. Installation
INITIAL SETUP
APPLICABLE MODELS
EQUIPMENT CONDITION
Parking brake set (TM 9-2320-260-10).
All
Driver's seat removed (para. 11-32).
MATERIALS/PARTS
. Companion seat removed (para. 11-31).
Adhesive (Appendix C, Item 21)
REFERENCES (TM)
TM 9-2320-260-10
TM 9-2320-260-20P
NOTE
All thermal barrier insulation is replaced the same way. This
procedure covers the left rear upper insulation panel only.
a. Removal
1. Pull panel (2) away from cab interior (1). Discard panel (2) if irreparable damage occurs when
removing.
2. Clean all remaining insulating material and adhesive from contact surface areas.
b. Installation
Once panel is coated with methyl-ethyl-ketone adhesive and put
in place, it cannot be moved. Be careful not to place panel in the
wrong position.
NOTE
Make all necessary cutouts and slits in panel before installation.
Shiny side of panel must face outward.
1. Place panel (2) in cab interior (1) to check for fit.
2. Remove panel (2) and coat contact areas with adhesive.
3. Install panel (2) on cab (1) and press panel (2) firmly into place.
14-40
