TM 9-2320-260-20
THIS TASK COVERS:
a. Removal
c. Assembly
b. Disassembly
d. Installation
INITIAL SETUP
APPLICABLE MODELS
REFERENCES (TM)
All
TM 9-2320-260-10
TM 9-2320-260-20P
MATERIALS/PARTS
EQUIPMENT CONDITION
Thirty locknuts
Twenty-four lockwashers
Parking brake set (TM 9-2320-260-10).
Two seals
a. Removal
1. Remove screw (12) and lockwasher (11) from each side of roof (1) and windshield frame (10).
Discard lockwashers (11).
2. Remove locknut (2), screw (8), and washer (9) from each side of roof (1) and windshield frame (10).
Discard locknuts (2).
NOTE
Assistant will help with step 3.
3. Remove fourteen locknuts (3), screws (7), twenty-eight washers (4), roof (1), and seal (5) from
windshield frame (10) and back panel (6). Discard locknuts (3) and seal (5).
4. Remove fourteen locknuts (18), screws (13), washers (19), and back panel (6) from cab (17). Discard
locknuts (18).
5. Remove two screws (16), retainers (15), and seal (14) from back panel (6). Discard seal (14).
I
b. Disassembly
1. Remove eight nuts (20), lockwashers (21), screws (24), and frame cap (23) from back panel (6) and
rear window (22). Discard lockwashers (21).
2. Remove fourteen nuts (27), lockwashers (26), screws (25), and rear window (22) from back panel (6).
Discard lockwashers (26).
1. Install rear window (22) on back panel (6) with fourteen screws (25), new lockwashers (26), and
nuts (27).
2. Install frame cap (23) on rear window (22) and back panel (6) with eight screws (24), new
lockwashers (21), and nuts (20).
14-44
