TM 9-2320-260-20
THIS TASK COVERS:
a. Removal
b. Installation
INITIAL SETUP
EQUIPMENT CONDITION
APPLICABLE MODELS
Parking brake set (TM 9-2320-260-10).
M816, M819, M821
q Hood raised and secured (TM 9-2320-260-10).
MATERIALS/PARTS
Toolbox removed (para. 11-29).
Ten locknuts
Battery ground cable disconnected (para. 4-48).
Three lockwashers
REFERENCES (TM)
TM 9-2320-260-10
TM 9-2320-260-20P
NOTE
Tag all wires for installation.
1. Disconnect leads (3) and (5) from connectors (4).
NOTE
Assistant will help with steps 2 and 3.
2. Remove two locknuts (1), screws (14), retainer (13), grommet (6), and lead (5) from firewall (2).
Discard locknuts (1).
3. Remove three locknuts (9), lockwashers (10), screws (7), clamps (8), and floodlight wiring
harness (12) from cab floor (11). Discard locknuts (9) and lockwashers (10).
4-110
