Receptacle Assembly Repair

TM 9-2320-260-20

4-52. WIRING HARNESS REPAIR (Contd)

e. Receptacle Assembly Repair

NOTE

Refer to TM 9-237 for soldering instructions.

Slide retaining nut (16) over cable (15).

Strip covering from cable (15), exposing leads (17).

Insert leads (17) through holes in grommet (22).

Trim leads (17) to even length from face of grommet (22).

Strip insulation from each lead (17) equal to depth of solder wells (19) on inserts (20).

Solder conductors (18) in solder wells (19) of inserts (20).

Seat leads (17) and inserts (20) in grommet (22) and install in receptacle assembly (21).

Thread retaining nut (16) on receptacle assembly (21) until seated.

FOLLOW-ON TASK: Connect battery ground cable (para. 4-48).

4-109