TM 9-2320-260-20
4-52. WIRING HARNESS REPAIR (Contd)
a. Terminal-Type Cable Connector Repair
1. Strip insulation (1) from cable (2) equal to depth of terminal well (4).
2. Slide insulator (3) over cable (2).
3. Insert cable (2) into terminal well (4) and crimp terminal well (4) tightly.
4. Slide insulator (3) over crimped end of terminal (5).
b. Plug End Cable Connector Repair
1.
Strip insulation (6) from cable (7) equal to depth of ferrule well (10).
2.
Slide shell (8) over cable (7).
3.
Insert cable (7) into ferrule well (10) and crimp ferrule well (10) tightly.
4.
Place C-clip (9) over crimped junctions at terminal (11).
Slide shell (8) over C-clip (9) and terminal (11).
4-107
