TM 9-2320-260-20
4-50. BATTERY BOX SUPPORTS REPLACEMENT
THIS TASK COVERS:
b. Installation
a. Removal
INITIAL SETUP
REFERENCES (TM)
APPLICABLE MODELS
TM 9-2320-260-10
All
TM 9-2320-260-20P
MATERIALS/PARTS
EQUIPMENT CONDITION
Twenty locknuts
Parking brake set (TM 9-2320-260-10).
Battery and battery box removed (para. 4-49).
1.
Remove four locknuts (11), screws (9), and running board (10) from two battery box hangers (7).
Discard locknuts (11).
2. Remove two locknuts (3), screws (5), and splash shield (4) from battery box hangers (7). Discard
locknuts (3).
3. Remove six locknuts (12), screws (8), and battery box support (6) from two battery box hangers (7).
Discard locknuts (12).
4. Remove eight locknuts (1), screws (13), and two battery box hangers (7) from right- hand frame
rail (2). Discard locknuts (1).
Install two battery box hangers (7) on right-hand frame rail (2) with eight screws (13) and new
1.
locknuts (1).
2. Install battery box support (6) on two battery box hangers (7) with six screws (8) and new
locknuts (12).
3. Install splash shield (4) on battery box hanger (7) with two screws (5) and new locknuts (3).
4. Install running board (10) on two battery box hangers (7) with four screws (9) and new
locknuts (11).
4-104
