TM 9-2320-260-20
4-48. BATTERY CABLES AND CLAMPS REPLACEMENT (Contd)
i. Battery-to-Battery Cable Installation
1. Apply light coat of GAA grease to terminal clamps (3).
2. Position two terminal clamps (3) and cable (2) on two battery posts (7) and tighten two nuts (4) and
screws (5).
j. Ground Cable Connection
1. Apply light coat of GM grease to terminal clamp (14).
2. Install terminal clamp (14) on battery post (12). Tighten nut (13) and screw (15).
3. Push each battery box (8) on running board (11) and back into stowage position.
4. Install two safety pins (9) in handles (10).
5. Install upper running board (1) on battery boxes (8) with two catches (6).
FOLLOW-ON TASK: Install cab tunnels (para. 11-30).
4-100
