TM 9-2320-260-20
I
THIS TASK COVERS:
a. Removal
b. Installation
INITIAL SETUP
EQUIPMENT CONDITION
APPLICABLE MODELS
Parking brake set (TM 9-2320-260-10).
All
Hood raised and secured (TM 9-2320-260-10).
MATERIALS/PARTS
Turn signal flasher removed (para. 4-32).
Cold start relay removed (para. 3-34).
Nine lockwashers
REFERENCES (TM)
TM 9-2320-260-10
TM 9-2320-260-20P
Disconnect harness (5) from protective control box (12).
1.
2. Remove screw (8), lockwasher (7), ground lead (6), and lockwasher (9) from protective control
box (12) and mounting bracket (3). Discard lockwashers (7) and (9).
3. Remove three screws (10), lockwashers (11), and protective control box (12) from mounting
bracket (3). Discard lockwashers (11).
4. Remove four screws (1), lockwashers (2), and bracket (3) from firewall (4). Discard lockwashers (2).
1.
Install mounting bracket (3) on firewall (4) with four new lockwashers (2) and screws (1).
2.
screws (10).
3. Install new lockwasher (9), ground lead (6), new lockwasher (7), and screw (8) on protective control
box (12).
4. Connect harness (5) to protective control box (12).
4-64
