TM 9-2320-260-20
THIS TASK COVERS:
b. Installation
a. Removal
lNITIAL SETUP
APPLICABLE MODELS
EQUIPMENT CONDITION
Parking brake set (TM 9-2320-260-10).
All
MATERIALS/PARTS
Two lockwashers
REFERENCES (TM)
TM 9-2320-260-10
TM 9-2320-260-20P
1. Remove two screws (1) and lockwashers (2), and push selector switch (5) through cab floor (3).
Discard lockwashers (2).
NOTE
Tag all wires for installation.
2. Disconnect three wires (4) from selector switch (5).
1. Connect three wires (4) to selector switch (5).
NOTE
Assistant will help with step 2.
2. Position selector switch (5) on cab floor (3) and install with two new lockwashers (2) and screws (1).
FOLLOW-ON TASK: Connect battery ground cable (para. 4-48).
4-63
