TURN SIGNAL CONTROL AND INDICATOR LAMP REPLACEMENT

TM 9-2320-260-20

4-33. TURN SIGNAL CONTROL AND INDICATOR LAMP REPLACEMENT

THIS TASK COVERS:

a. Removal

b. Installation

INITIAL SETUP

EQUIPMENT CONDITION

APPLICABLE MODELS

All

Parking brake set (TM 9-2320-260-10).

Battery ground cable disconnected (para. 4-48).

REFERENCES (TM)

TM 9-2320-260-10

TM 9-2320-260-20P

NOTE

For indicator lamp replacement, perform Removal step 1 and

Installation step 3 only.

1. Remove cable connector (5) from turn signal control (4).

2. Remove clamp (2) and turn signal control (4) from steering column (3).

3. Remove lamp lens (1) and lamp (6) from turn signal control (4).

1. Install lamp (6) and lamp lens (1) on turn signal control (4).

2. Position turn signal control (4) to steering column (3) and install with clamp (2).

3. Connect cable connector (5) to turn signal control (4).

FOLLOW-ON TASKS: Connect battery ground cable (para. 4-48).

Check turn signal control for proper operation (TM 9-2320-260-10).

4-61