TM 9-2320-260-20
I
THIS TASK COVERS:
a. Removal
b. Installation
lNITIAL SETUP
EQUIPMENT CONDITION
APPLICABLE MODELS
All
Parking brake set (TM 9-2320-260-10).
Hood raised and secured (TM 9-2320-260-10).
MATERIALS/PARTS
Battery ground cable disconnected (para. 4-48).
Two lockwashers
REFERENCES (TM)
TM 9-2320-260-10
TM 9-2320-260-20P
Disconnect harness (3) from turn signal flasher (2).
1.
2. Remove two screws (5), lockwashers (6), ground lead (4), and turn signal flasher (2) from mounting
flasher (1). Discard lockwashers (6).
1. Install turn signal flasher (2) and ground lead (4) on mounting bracket (1) with two new lock-
washers (6) and screws (5).
2. Connect harness (3) to turn signal flasher (2).
FOLLOW-ON TASKS: Connect battery ground cable (para 4-48).
Check turn signal flasher for proper operation (TM 9-2320-260-10).
4-60
