C1, TM 9-2320-211-20
NOTE
t h e cab must be secured in its locked
When installing new lines or fittings, never
position.
tighten over two turns after the sleeve has
a. Installing Seats.
shouldered in the body of the fitting.
(1) Fold out the legs of the right troop seat
(3) Tighten all flexible-line sleeve nuts.
assembly flat on the floor of the body.
(2) Raise the hook end of the seat assembly,
WARNING
and engage the hooks in the slots in the side of the
When using the M51 dump truck model or
body as shown in figure 2-225.
t h e M51A2 dump truck model as a per-
(3) Raise the seat, using hook ends as pivots
s o n n e l carrier, the dump control lever in
and fold the legs under the seat as shown in figure
2-226.
