TM 9-2320-366-20-5
This task covers:
a. Removal
c. Follow-On Maintenance
b. Installation
INITIAL SETUP
Equipment Conditions
Material/Parts
Dump body raised to maintenance position (TM
Dispenser, Pressure Sensitive Adhesive Tape (Item
9-2320-366-10-1).
20, Appendix D)
Engine shut down (TM 9-2320-366-10-1).
Antiseize Compound (Item 13, Appendix D)
Air tanks drained (TM 9-2320-366-10-1).
Tools and Special Tools
Tool Kit, Genl Mech (Item 46, Appendix C)
Goggles, Industrial (Item 15, Appendix C)
WARNING
Wear appropriate eye protection when
working under vehicle due to the
possibility of falling debris. Failure to
comply may result in injury to personnel.
a. Removal.
NOTE
Tag hoses and connection points prior to
disconnecting.
(1) Disconnect two hoses (1) from 90-degree fittings (2).
WARNING
Retaining rings are under tension and can
act as projectiles when released causing
severe eye injury.
Use care when
removing retaining rings.
Failure to
comply may result in injury to personnel.
(2) Remove two retaining rings (3) and pivot pin (4) from
tailgate pneumatic cylinder (5).
(3) Remove cotter pin (6), pivot pin (7), and tailgate
pneumatic cylinder (5) from dump body (8).
