TM 9-2320-366-20-5
WARNING
Adhesives,
solvents,
and
sealing
compounds can burn easily, can give off
harmful vapors, and are harmful to skin
and clothing. Keep away from open fire
and use in a well-ventilated area. If
adhesive, solvent, or sealing compound
gets on skin or clothing, wash
immediately with soap and water. Failure
to comply may result in injury to
personnel.
(19) Apply sealant to threads of four screws (40).
(20) Install head pad (41) on front head pad brace (35)
with four washers (42) and screws (40).
d.
Installation.
(1) Position bottom support (1) and rack assembly (2) in
cab.
(2) Apply sealant to threads of eight screws (3) and six
screws (4).
(3) Position rack assembly (2) on bottom support (1) with
eight washers (5) and screws (3).
(4) Tighten eight screws (3) to 110-120 lb-in. (12-13
Nm).
(5) Position MTS plate (6) on bottom support (1) with
four washers (7) and screws (4).
(6) Position two washers (7) and screws (4) in bottom
support (1).
Change 2
20-537