TM 9-2320-366-20-5
20-82. DIGITIZATION KIT RADIO RACK ASSEMBLY REPLACEMENT/REPAIR (CONT)
WARNING
Adhesives,
solvents,
and
sealing
compounds can burn easily, can give off
harmful vapors, and are harmful to skin
and clothing. Keep away from open fire
and use in a well-ventilated area. If
adhesive, solvent, or sealing compound
gets on skin or clothing, wash
immediately with soap and water. Failure
to comply may result in injury to
personnel.
(12) Apply sealant to threads of four screws (26).
(13) Install power distribution shelf (27) in support legs
(4) with four washers (28) and screws (26).
(14) Position PLGR/M42 alarm plate (29) on support
legs (4) with four washers (30), screws (31), and
self-locking nuts (32).
(15) Tighten four self-locking nuts (32) to 110-120 lb-in.
(12-13 Nm).
(16) Apply sealant to threads of 12 screws (33).
(17) Install top rear wall bracket (34) and front head pad
bracket (35) on support legs (4) with four washers
(36 and 37) and screws (33).
(18) Install SINGGAR shelf (38) on support legs (4) with
four washers (39) and screws (33).
20-536
Change 2
