TM 9-2320-366-20-5
WARNING
Adhesives,
solvents,
and
sealing
compounds can burn easily, can give off
harmful vapors, and are harmful to skin
and clothing. Keep away from open fire
and use in a well-ventilated area. If
adhesive, solvent, or sealing compound
gets on skin or clothing, wash
immediately with soap and water. Failure
to comply may result in injury to
personnel.
(11) Apply sealant to threads of six screws (18) and
eight screws (19).
(12) Position top support (20) on rack assembly (2) with
six washers (21) and screws (18).
(13) Position eight washers (22) and screws (19) in top
support (20).
(14) Tighten two screws (12 and 13) to 70-85 lb-in.
(8-10 Nm).
(15) Tighten three self-locking nuts (11) to 110-120 lb-
in.(12-13 Nm).
(16) Tighten six screws (18) to 70-85 lb-in. (8-10 Nm).
(17) Tighten eight screws (19) to 110-120 lb-in. (12-13
Nm).
e. Follow-on Maintenance
(1) Install RH seat (Para 16-15)
(2) Install digitization power cable (Para 20-81)
(3) Install mounting base(s) and equipment.
(4) Connect batteries (Para 7-57)
End of Task
Change 2
20-539
