TM 9-2320-366-20-5
20-81. DIGITIZATION KIT POWER CABLE REMOVAL/INSTALLATION (CONT)
(20) Install terminal lug TL25 (44) on dashboard (32)
with screw (45).
(21) Install terminal lug TL19 (46) on dashboard (32)
with screw (47).
NOTE
Perform steps (22) and (23) if replacing the
digitization power cable on vehicle serial
numbers 0001 through 11347 equipped with
WTEC II controller.
(22) Remove terminal lug TL22 ring terminal (48) from
NEW digitization power cable and strip insulation
5/16 in (8 mm).
(23) Install terminal lug TL22 spade terminal (48) on NEW
digitization power cable.
NOTE
Perform steps (24) and (25) if replacing the
digitization power cable on vehicle serial
numbers 00001 through 11347 equipped with
WTEC III controller.
(24) Remove terminal lug TL22, ring terminal (49) from
NEW digitization power cable and strip insulation
5/16 in (8 mm).
(25) Install terminal lug TL22, spade terminal (49) on
NEW digitization power cable and wire 146.
20-526
Change 2
