TM 9-2320-366-20-5
20-81. DIGITIZATION KIT POWER CABLE REMOVAL/INSTALLATION (CONT)
(24) Remove circuit breakers from distribution panels
PD1 and PD2 (para 20-80).
(25) Remove four nuts (58), lockwashers (59), screws
(60), and distribution panel PD1 (61) from power
distribution shelf (40). Discard lockwashers.
(26) Remove two nuts (62), lockwashers (63), screws
(64), and distribution panel PD2 (65) from power
distribution shelf (40). Discard lockwashers.
NOTE
Note routing of digitization power cable prior
to removal.
(27) Remove digitization power cable (66) from vehicle.
b. Installation
(1) Position digitization power cable (1) in vehicle.
(2) Install distribution panel PD2 (2) on power
distribution shelf (3) with two screws (4), lockwashers
(5), and nuts (6).
(3) Install distribution panel PD1 (7) on power
distribution shelf (3) with four screws (8), lockwashers
(9), and nuts (10).
(4) Install circuit breakers in distribution panels PD2 and
PD1 (para 20-80).
20-522
Change 2
