TM 9-2320-366-20-5
(12) Position electrical distribution block cover (28) on
power distribution shelf (3).
(13) Tighten wing screw (29) on electrical distribution
block cover (28).
(14) Install wing screw (30) in electrical distribution
block cover (28).
(15)
Install circuit breaker CB11 (31) on dashboard (32)
with two screws (33).
(16)
Install terminal lug TL24 (34) on stud (35) with
washer (36) and nut (37).
(17)
Install dust boot (38) on stud (35).
(18) Install terminal lug TL23 (39) on stud (40) with
washer (41) and nut (42).
(19) Install dust boot (43) on stud (40).
Change 2
20-525