TM 9-2320-366-20-5
b. Installation.
NOTE
Install plastic cable ties as required.
(1) Position battery to 200 amp terminal block 12 vdc cable
(1) on vehicle.
(2) Position terminal lug TL47 (2) on terminal block (3) with
washer (4), lockwasher (5), and nut (6).
(3) Tighten nut (6) to 15-19 lb-ft (21-25 Nm).
(4) Position turbocharger intake hose (7) on intake air
cleaner boot (8) with clamp (9).
(5) Tighten clamp (9) to 36-48 lb-in. (4-5 Nm).
c. Follow-On Maintenance.
(1) Connect batteries (para 7-57).
(2) Raise spare tire (TM 9-2320-366-10-2).
(3) Start engine (TM 9-2320-366-10-1).
(4) Check VOLTS gage for charge indication (TM 9-2320-
366-10-1).
(5) Shut down engine (TM 9-2320-366-10-1).
End of Task.
20-295