TM 9-2320-366-20-5
This task covers:
a. Removal
c. Follow-On Maintenance
b. Installation
INITIAL SETUP
Equipment Conditions
Materials/Parts
Batteries disconnected (para 7-57).
Dispenser, Pressure Sensitive Adhesive Tape
Alternator belts removed (para 7-3).
(Item 20, Appendix D)
Nut, Self-Locking (Item 153, Appendix G)
Tools and Special Tools
Tool Kit, Genl Mech (Item 46, Appendix C)
Personnel Required
Sling, Cargo (Item 31, Appendix C)
(2)
Vise, Machinist (Item 48, Appendix C)
Caps, Vise Jaw (Item 4, Appendix C)
Wrench, Torque, 0-175 lb-ft (Item 58, Appendix C)
Wrench, Torque, 0-200 lb-in. (Item 59, Appendix C)
Socket Set, Socket Wrench (Item 34, Appendix C)
a. Removal.
(1) Lift dust boot (1) on terminal lug TL6 (2).
(2) Remove nut (3), lockwasher (4), washer (5), terminal
lugs TL6 (2) TL2 (6) and fuse link (7) from alternator
terminal (8).
(3) Position fuse link (7), washer (5), lockwasher (4), and nut
(3) on alternator terminal (8).
(4) Lift dust boot (9) on terminal lug TL60 (10).
(5) Remove nut (11), lockwasher (12), washer (13), and
terminal lug TL60 (10) from alternator terminal (14).
(6) Position washer (13), lockwasher (12) and nut (11) on
alternator terminal (14).
Change 1
