TM 9-2320-366-20-5
(108) Remove two screws (165),lockwashers (166), and belt
adjusting arm (167) from alternator bracket (159).
Discard lockwashers.
(109) Position belt adjusting arm (168) on alternator bracket
(159) with two lockwashers (166) and screws (165).
(110) Tighten two screws (165) to 25-32 lb-ft (35-43 Nm).
b. Follow-On Maintenance.
(1) Install 100 amp reverse polarity relay (para 7-30).
(2) Install 100 amp alternator (para 7-2).
(3) Raise spare tire (TM 9-2320-366-10-2).
(4) Lower cab (TM 9-2320-366-20-1).
(5) Connect batteries (para 7-57).
(6) Start engine (TM 9-2320-366-10-1).
(7) Check VOLTS gage for charge indication (TM 9-2320-
366-10-1).
(8) Shut down engine (TM 9-2320-366-10-1).
End of Task.
20-261
