TM 9-2320-366-20-5
This task covers:
a.
Removal
c. Follow-On Maintenance
b.
Installation
INITIAL SETUP
Equipment Conditions
Materials/Parts (Cont)
Hydraulic oil filter assembly removed (para 19-13).
Sealing Compound (Item 57, Appendix D)
Oil, Lubricating, OE/HDO 10W (Item 43,
Tools and Special Tools
Tool Kit, Genl Mech (Item 46, Appendix C)
Packing, Preformed (2) (Item 185, Appendix G)
Wrench, Torque, 0-175 lb-ft (Item 58, Appendix C)
Nut, Self-Locking (Item 152, Appendix G)
Wrench, Torque 0-600 lb-ft (Item 60, Appendix C)
Nut, Self-Locking (4) (Item 157, Appendix G)
Socket Set, Socket Wrench (Item 33, Appendix C)
Insulator, Tank (Item 60, Appendix G)
Container (30 gal (113 L) capacity)
Insulator, Tank (Item 61, Appendix G)
Materials/Parts
Personnel Required
Dispenser, Pressure Sensitive Adhesive Tape (Item
(2)
20, Appendix D)
Cap and Plug Set (Item 14, Appendix D)
a. Removal.
CAUTION
Cap or plug hydraulic connections and
connection points to prevent contamination
of hydraulic system. Failure to comply may
result in damage to equipment.
NOTE
Tag hoses and connection points prior to
disconnecting.
(1) Remove cap (1) from hydraulic reservoir (2).
(2) Position container under drain plug (3).
(3) Remove drain plug (3) from hydraulic reservoir (2)
and drain oil.
(4) Install drain plug (3) in hydraulic reservoir (2).
(5) Install cap (1) on hydraulic reservoir (2).
Change 2
