TM 9-2320-366-20-5
This task covers:
a. Service
c. Installation
b. Removal
d. Follow-On Maintenance
INITIAL SETUP
Equipment Conditions
Materials/Parts
Engine shut down (TM 9-2320-366-10-1).
Filter Element, Fluid (Item 20, Appendix G)
(Service)
Seal, Plain (Item 271.1, Appendix G) (Service)
Tools and Special Tools
Tool Kit, Genl Mech (Item 46, Appendix C)
Dispenser, Pressure Sensitive Adhesive Tape
Wrench, Torque, 0-175 lb-ft (Item 58, Appendix C)
(Item 20, Appendix D)
Pan, Drain (Item 24, Appendix C)
Tape, Antiseizing (Item 66, Appendix D)
Oil, Lubricating, OE/HDO 10W (Item 43,
Filter Element, Fluid (Item 20, Appendix G)
Packing, Preformed (2) (Item 180, Appendix G)
a. Service.
(1) Remove hydraulic oil filter assembly bowl (1) from filter
assembly base (2).
(2) Remove fluid filter element (3) from oil filter assembly
base (2). Discard fluid filter element.
(3) Remove seal (4) from hydraulic oil filter assembly base
(1). Discard seal.
NOTE
Apply lubricating oil to seal prior to
installation.
(4) Install seal (4) on hydraulic oil filter assembly base (2).
(5) Install fluid filter element (3) in hydraulic oil filter
assembly base (2).
(6) Install hydraulic oil filter assembly bowl (1) on filter
assembly base (2) and hand tighten.
Change 1
