TM 9-2320-366-20-5
NOTE
Perform steps (6) and (7) on models M1090
and M1094.
(6) Remove four self-locking nuts (4) and bolts (5)
from guard support bracket (6) and stone guard (7).
Discard self-locking nut.
(7) Remove guard support bracket (6) from
bracket (8).
(8) Disconnect hose (9) from 90-degeree fitting (10).
(9) Disconnect hose (11) from fitting (12).
(10) Remove nut (13) from strap (14).
(11) Remove hydraulic reservoir (2) from support (15).
(12) Remove 90-degree fitting (10) from hydraulic
reservoir (2).
(13) Remove preformed packing (16) from 90-degree
fitting (10). Discard preformed packing.
(14) Remove fitting (12) from hydraulic reservoir (2).
(15) Remove preformed packing (17) from fitting (12).
Discard preformed packing.
Change 2
19-93
