TM 9-2320-366-20-5
19-19. HYDRAULIC RESERVOIR AND BRACKET REPLACEMENT (CONT)
c. Assembly.
NOTE
Perform steps (1) through (8) on models
M1090 and M1094).
Apply lubricating oil to performed
packings during installation.
(1) Install filter element (1) on 90-degree fitting (2) in
bottom of hydraulic tank (3).
(2)
Install plug (4) in hydraulic reservoir (3).
(3)
Install tube assembly (5) in hydraulic reservoir (3).
(4)
Install vent valve (6) in hydraulic reservoir (3).
(5)
Install preformed packing (7) on cover plate (8).
(6)
Position cover plate (8) on hydraulic reservoir (3)
with six bolts (9).
(7)
Tighten bolts (9) to 64-80 lb-in (87-108 Nm).
(8)
Install liquid indicator (10) in cover plate (8).
19-94.2
Change 2
