TM 9-2320-366-20-5
19-11. CAB HYDRAULIC CYLINDER REPLACEMENT (CONT)
(13) Remove cotter pin (17), spring washer (18), and cab
hydraulic cylinder (1) from stud (19). Discard cotter pin
and spring washer.
(14) Remove control cam (20) and spring washer (21) from
mounting bracket (22). Discard spring washer.
(15) Loosen jamnut (23) under mounting bracket (22) until
jamnut (23) bottoms out on threads.
(16) Remove mounting bracket (22) from cab hydraulic
cylinder (1).
(17) Remove 90-degree fittings (4 and 5) from cab hydraulic
cylinder (1).
(18) Remove preformed packings (24) from 90-degree fittings
(4 and 5). Discard preformed packings.
